Behringer X Air Download: How to Get Started with Your Digital Mixer
If you are looking for a compact, versatile, and affordable digital mixer for your live or studio applications, you might want to check out the Behringer X Air series. In this article, we will show you how to download and install the X Air app, which allows you to control all the mixing, processing, and effects functions of your X Air mixer from your tablet or smartphone. We will also give you some tips and tricks on how to use the app effectively and get the most out of your X Air mixer.
What is Behringer X Air?
A brief introduction to the X Air series of digital mixers
The Behringer X Air series consists of four models of digital mixers that are designed to serve live portable sound customers. They are:
behringer x air download
The XR18, which has 18 inputs (16 mic/line, two line), eight outputs (main L/R and six auxes), and one headphone output.
The XR16, which has 16 inputs (eight mic/line, eight line), six outputs (main L/R and four auxes), and one headphone output.
The XR12, which has 12 inputs (four mic/line, eight line), two outputs (main L/R), and one headphone output.
The X18, which has 18 inputs (16 mic/line, two line), six outputs (main L/R and four auxes), one headphone output, and a built-in tablet tray.
All of these mixers feature high-quality Midas-designed preamps, 40-bit floating-point DSP, full-featured channel processing, four internal stereo effects processors, USB audio interface, Ultranet connectivity, and built-in Wi-Fi module. They also come with rack ears and protection bumpers for convenient stage box or rackmount installation.
The main features and benefits of using X Air mixers
Some of the main features and benefits of using X Air mixers are:
You can control all the mixing, processing, and effects functions of your X Air mixer from your tablet or smartphone using the X Air app. This gives you the mobility to adjust your house mix from any seat or fine-tune monitor mixes from on-stage.
You can choose from different versions of the X Air app for various devices, such as iOS, Android, PC, Mac, Linux, or Raspberry Pi. The app interface is configurable for either simplified access or expert level editing.
You can use up to four devices simultaneously to control your X Air mixer. This allows you to collaborate with other engineers or musicians or create personal monitor mixes for each performer.
You can access a wide range of studio-quality effects from the X32 audio processing engine. You can use up to four multi-effects modules in parallel or as inserts on any channel or bus. You can also use a 100-band RTA for all channel and bus EQs.
You can record and play back up to 18 audio channels to your computer via USB. You can also use the USB port to play back music files or update the firmware of your X Air mixer.
You can connect your X Air mixer to other devices via Ultranet, which is a digital audio network that can carry 16 channels of audio over a single Cat 5 cable. You can use Ultranet to send audio to personal monitor mixers, powered loudspeakers, or other devices that support Ultranet.
How to Download and Install the X Air App
The different versions of the X Air app for various devices
The X Air app is available for different devices and operating systems. You can choose the version that suits your needs and preferences. Here are the main versions of the X Air app:
behringer x air app for android
behringer x air ipad app for x18/xr18/xr16/xr12 digital mixers
behringer x air software for windows
behringer x air edit for mac
behringer x air manual pdf download
behringer x air firmware update
behringer x air xr18 drivers download
behringer x air xr12 setup guide
behringer x air xr16 review
behringer x air x18 vs xr18
behringer x air xr12 vs xr16
behringer x air xr18 tutorial
behringer x air xr12 dimensions
behringer x air xr16 dimensions
behringer x air xr18 dimensions
behringer x air xr12 weight
behringer x air xr16 weight
behringer x air xr18 weight
behringer x air xr12 rack mount kit
behringer x air xr16 rack mount kit
behringer x air xr18 rack mount kit
behringer x air xr12 price
behringer x air xr16 price
behringer x air xr18 price
behringer x air xr12 vs soundcraft ui12
behringer x air xr16 vs soundcraft ui16
behringer x air xr18 vs soundcraft ui24r
behringer x air xr12 vs mackie dl806
behringer x air xr16 vs mackie dl1608
behringer x air xr18 vs mackie dl32s
behringer x air xr12 vs presonus studiolive ar8c
behringer x air xr16 vs presonus studiolive ar16c
behringer x air xr18 vs presonus studiolive 32sc
behringer x air xr12 vs allen & heath qu-sb
behringer x air xr16 vs allen & heath qu-pac
behringer x air xr18 vs allen & heath qu-32c
behringer x air app for iphone
behringer x air app for windows 10
behringer x air app for macbook pro
behringer x air app for chromebook
behringer x air app tutorial video
behringer x air app tips and tricks
behringer x air app not connecting to mixer
behringer x air app demo mode without mixer
behringer x air app personal monitoring mode
The X Air Edit app for PC, Mac, Linux, or Raspberry Pi. This is a desktop application that offers a full-featured control interface for your X Air mixer. You can download it from the official Behringer website.
The X Air app for iOS or Android. This is a mobile application that offers a simplified control interface for your X Air mixer. You can download it from the App Store or Google Play Store.
The Mixing Station app for iOS or Android. This is a third-party application that offers a customizable control interface for your X Air mixer. You can download it from the App Store or Google Play Store.
The steps to download and install the app from the official website or app store
The steps to download and install the app from the official website or app store are:
Go to the official Behringer website and navigate to the product page of your X Air mixer model.
Click on the Downloads tab and select the version of the X Air Edit app that matches your device and operating system.
Download the app file and save it to your device.
Run the app file and follow the instructions to install the app on your device.
Alternatively, you can go to the App Store or Google Play Store and search for the X Air app or the Mixing Station app.
Download and install the app on your device.
How to Connect and Control Your X Air Mixer with the App
The options for connecting your device to the mixer's built-in Wi-Fi or Ethernet port
To connect and control your X Air mixer with the app, you need to establish a network connection between your device and the mixer. You have two options for doing this:
You can use the mixer's built-in Wi-Fi module, which creates a wireless network that you can join with your device. To do this, you need to turn on the Wi-Fi switch on the back of your mixer and wait for a few seconds until the Wi-Fi LED turns green. Then, you need to go to the Wi-Fi settings on your device and select the network name that starts with "XAir". The default password is "behringer".
You can use an Ethernet cable to connect your device to the mixer's Ethernet port, which is located on the back of your mixer next to the Wi-Fi switch. To do this, you need to turn off the Wi-Fi switch on your mixer and connect one end of the Ethernet cable to the mixer's Ethernet port and the other end to your device's Ethernet port or adapter. Then, you need to go to the network settings on your device and configure the IP address and subnet mask to match the mixer's network. The default IP address of the mixer is 192.168.1.1 and the default subnet mask is 255.255.255.0.
The basic functions and settings of the app interface
Once you have connected your device to the mixer's network, you can launch the app and start controlling your X Air mixer. The app interface may vary depending on the version and device you are using, but the basic functions and settings are similar. Here are some of the main elements of the app interface:
The Home screen, which shows an overview of your mixer's inputs, outputs, effects, and meters. You can tap on any channel or bus to access its detailed settings.
The Channel screen, which shows the settings for a selected channel or bus, such as gain, phantom power, polarity, EQ, dynamics, sends, pan, mute, solo, fader, and name. You can adjust these settings by using sliders, knobs, buttons, or menus.
The Effects screen, which shows the settings for a selected effects module, such as type, parameters, presets, and routing. You can choose from a variety of effects, such as reverb, delay, chorus, flanger, pitch shifter, compressor, limiter, gate, and more.
The Meters screen, which shows the input and output levels of all channels and buses. You can also see the clip indicators and peak hold values.
The Setup screen, which shows the global settings for your mixer, such as sample rate, sync source, Wi-Fi password, network configuration, firmware update, scene management, and more. You can also access the help menu and the app preferences from this screen.
Some tips and tricks for using the app effectively
Here are some tips and tricks for using the app effectively:
You can use gestures to navigate the app interface faster and easier. For example, you can swipe left or right to switch between channels or buses, swipe up or down to scroll through menus or lists, pinch in or out to zoom in or out on EQ curves or RTA graphs, double-tap to reset a parameter to its default value, or long-press to access additional options or information.
You can use shortcuts to access frequently used functions or settings. For example, you can tap on the fader icon to open the fader view, tap on the EQ icon to open the EQ view, tap on the FX icon to open the effects view, or tap on the meter icon to open the meters view. You can also tap on the home icon to return to the home screen.
You can use the scene management function to save and recall different settings for your mixer. For example, you can create scenes for different venues, bands, songs, or situations. You can also use the snapshot function to capture and restore a specific moment of your mix.
You can use the USB audio interface function to record and play back audio to and from your computer. For example, you can record your live performance, play back backing tracks, or use your computer as an external effects processor. You can also use the USB port to play back music files from a USB stick or update the firmware of your mixer.
You can use the Ultranet function to connect your mixer to other devices that support Ultranet, such as personal monitor mixers or powered loudspeakers. For example, you can send individual monitor mixes to each performer or send a stereo mix to a pair of loudspeakers.
Conclusion
The Behringer X Air series of digital mixers are powerful, portable, and affordable solutions for your live or studio applications. By using the X Air app, you can control all the mixing, processing, and effects functions of your X Air mixer from your tablet or smartphone. You can also use various features and functions to enhance your mixing experience and achieve professional results. We hope this article has helped you learn how to download and install the X Air app and how to use it effectively. If you have any questions or feedback, please feel free to contact us or leave a comment below.
FAQs
What are the differences between the X Air models?
The main differences between the X Air models are the number of inputs, outputs, and headphone outputs. The XR18 has 18 inputs (16 mic/line, two line), eight outputs (main L/R and six auxes), and one headphone output. The XR16 has 16 inputs (eight mic/line, eight line), six outputs (main L/R and four auxes), and one headphone output. The XR12 has 12 inputs (four mic/line, eight line), two outputs (main L/R), and one headphone output. The X18 has 18 inputs (16 mic/line, two line), six outputs (main L/R and four auxes), one headphone output, and a built-in tablet tray.
What are the system requirements for running the X Air app?
The system requirements for running the X Air app are:
For PC: Windows 7 or higher, dual-core CPU, 2 GB RAM, 100 MB free disk space.
For Mac: OS X 10.10 or higher, dual-core CPU, 2 GB RAM, 100 MB free disk space.
For Linux: Ubuntu 14.04 or higher, dual-core CPU, 2 GB RAM, 100 MB free disk space.
For Raspberry Pi: Raspbian Jessie or higher, dual-core CPU, 1 GB RAM, 100 MB free disk space.
For iOS: iOS 9.0 or higher, iPad Air or newer.
For Android: Android 4.0 or higher, tablet with at least 7-inch screen.
How can I update the firmware of my X Air mixer?
To update the firmware of your X Air mixer, you need to:
Download the latest firmware file from the official Behringer website and save it to your computer or USB stick.
Connect your computer or USB stick to your mixer via USB.
Go to the Setup screen on your app and select Firmware Update.
Select the firmware file from your computer or USB stick and confirm the update.
Wait for the update process to complete and restart your mixer.
How can I use external effects or instruments with my X Air mixer?
To use external effects or instruments with your X Air mixer, you need to:
Connect your external effects or instruments to your mixer's inputs or outputs using appropriate cables.
Go to the Channel screen on your app and select the channel or bus that you want to use with your external effects or instruments.
Select the Insert tab and choose whether you want to use an insert send or an insert return for your external effects or instruments.
Adjust the send and return levels and the delay compensation for your external effects or instruments.
Save your settings and enjoy your external effects or instruments.
How can I get support or feedback for my X Air mixer or app?
To get support or feedback for your X Air mixer or app, you can:
Visit the official Behringer website and browse the product pages, manuals, videos, forums, and FAQs for your X Air mixer or app.
Contact the Behringer customer service or technical support team via phone, email, or chat.
Join the Behringer X Air Users Group on Facebook and interact with other X Air users and experts.
Leave a review or rating for your X Air mixer or app on the App Store or Google Play Store.
44f88ac181
Comentarios